Dec 12, 2022     More tips - (5 hours)       Category: Tail Feathers

Sam continued to finish up the left HS and elevator tips by epoxying in aluminum bracket to both tips to support the factory end of the blind rivets. Edge distance is an issue that can't really be resolved, so we'll epoxy the elevator tips in as well. I started trimming the right HS and elevator tips. Match drilled the elevator tip to the elevator and deburred. Laid out the 4 upper and lower rivet lines for the HS stab tip, match drilled and deburred. Installed both right elevator and HS tips and trimmed for 1/8” spacing.